NEWS

[OOC] Missions 2 - Trash the Body Electric

  • 1367 Replies
  • 382509 Views

Kouryuu

  • *
  • Prime Runner
  • *****
  • Posts: 2717
  • The idea is to die young as late as possible -A.M.
« Reply #1245 on: <06-07-11/1546:50> »
God, how I'd love to be a player on this run :)
Too much work and no GM privileges, yeah we have the life, man.
So do I think. Even with standard grenade you wouldnt create the hole in the floor, but to destroy the machinery you need only to bend some of their parts for centimeters (even milimeters would be enought). The charge you can mold in half of your hand + detonator for every target is all you need...just walk around and slap it there....
and dont forget,,,chameleon suit is computer operated, it may even be programed to look like an uniform...you may take raincoat over it and no guard would recognize you until its too late.
in close was it somthing like +2 or +4 on preception, so this is a no go

about the damage, it depends, if i only need a small batch i need to place it near some rare and difficult to replace parts, and i do not have that kind of knowledge. placing it just somewhere would end up blowing the inessential parts that they can replace like yesterday,
Prepare for the worst, hope for the best and expect nothing!
Matrix;speaking;thinking;ExternalSourcesLink
RainDragonBar

Netzgeist

  • *
  • Ace Runner
  • ****
  • Posts: 1556
  • Serpens, nisi serpentem comederit, non fit draco
« Reply #1246 on: <06-07-11/1550:04> »
God, how I'd love to be a player on this run :)
Too much work and no GM privileges, yeah we have the life, man.

Yeah, we have the life. Before joining this game, I didn't know for how long I haven't played. GMing is both a blessing and a curse.

Don't know if the others feels like it, but almost always I played I wanted to GM, and whenever I GMed I wanted to play...

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1247 on: <06-07-11/1551:45> »
@Sent: Should we assume that I can give Sam the directions to takleout right piece ov machinery? As soon as i got the image, I should roll to see if I know something...what do you say? Ive been even asking Eric on this topic...

Sentinemodo

  • *
  • Prime Runner
  • *****
  • Posts: 4498
  • Prepare for the worst - surprises will be pleasant
« Reply #1248 on: <06-07-11/1554:53> »
about the damage, it depends, if i only need a small batch i need to place it near some rare and difficult to replace parts, and i do not have that kind of knowledge. placing it just somewhere would end up blowing the inessential parts that they can replace like yesterday,

Without CEO to organize things? remember you have an ace here - tommorow they will spend time to look for their chief, then his vices will start acting, and all the time the cash in unfinished products will bleed them out. There is only so much you need to do. Overpowering the entire facility to act as you please is certainly an option. (and an outstanding feat, if you manage to do so without informing the security central) but it is a platinium solution, while only a silver one is necessary (the gold would be if you do the silver, and manage to cut yourself some additional cash).

Sorry for a small delay ;)

Denver Missions
concluded 01 02 03 04 05 10 09 11
running 13
runners: Caretaker Jerry

Sentinemodo

  • *
  • Prime Runner
  • *****
  • Posts: 4498
  • Prepare for the worst - surprises will be pleasant
« Reply #1249 on: <06-07-11/1600:30> »
God, how I'd love to be a player on this run :)
Too much work and no GM privileges, yeah we have the life, man.

Yeah, we have the life. Before joining this game, I didn't know for how long I haven't played. GMing is both a blessing and a curse.

Don't know if the others feels like it, but almost always I played I wanted to GM, and whenever I GMed I wanted to play...

You don't have a gillete with you so I'll share and idea I got an hour ago (or you can treat it as Cursor's input) - I'd just stack the heaviest armor possible, and run like mad through the assembly building throwing explosive grenades under the assembly and stun grenades in the general direction of guards crying 'GRENADES !!!! run for your life!!! ' and then just skip away. Even to die that way would be funny :D It reminds me of Murdock style from the A-Team. There would be no loot that way, and the security would be there in five minutes, but what the hell :D
« Last Edit: <06-07-11/1606:51> by Sentinemodo »
Sorry for a small delay ;)

Denver Missions
concluded 01 02 03 04 05 10 09 11
running 13
runners: Caretaker Jerry

Sentinemodo

  • *
  • Prime Runner
  • *****
  • Posts: 4498
  • Prepare for the worst - surprises will be pleasant
« Reply #1250 on: <06-07-11/1602:19> »
@Sent: Should we assume that I can give Sam the directions to takleout right piece ov machinery? As soon as i got the image, I should roll to see if I know something...what do you say? Ive been even asking Eric on this topic...

Yep.  No rolls needed. I'll be rolling once you do some damage. So far it looks like you want to take out the entire assembly line, so I haven't thought about damage to repair ratios.
« Last Edit: <06-07-11/1606:12> by Sentinemodo »
Sorry for a small delay ;)

Denver Missions
concluded 01 02 03 04 05 10 09 11
running 13
runners: Caretaker Jerry

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1251 on: <06-07-11/1609:04> »
God, how I'd love to be a player on this run :)
Too much work and no GM privileges, yeah we have the life, man.

Yeah, we have the life. Before joining this game, I didn't know for how long I haven't played. GMing is both a blessing and a curse.

Don't know if the others feels like it, but almost always I played I wanted to GM, and whenever I GMed I wanted to play...

You don't have a gillete with you so I'll share and idea I got an hour ago - I'd just stack the heaviest armor possible, and run like mad through the assembly building throwing explosive grenades under the assembly and stun grenades in the general direction of guards crying 'GRENADES !!!! run for your life!!! ' and then just skip away. Even to die that way would be funny :D

INDEED  ;D

on this account Im still waiting for your access points intel, so I find out if it is an option to get inthere with my Rover and ram those lines down while dragging attetion from Cam stealthly placing explosives

But in fact I was thinking about damaging 4-6 assembly robots, not whole line...well that overkill version is still on the table...

Kouryuu

  • *
  • Prime Runner
  • *****
  • Posts: 2717
  • The idea is to die young as late as possible -A.M.
« Reply #1252 on: <06-07-11/1610:00> »
Without CEO to organize things? remember you have an ace here - tommorow they will spend time to look for their chief, then his vices will start acting, and all the time the cash in unfinished products will bleed them out. There is only so much you need to do. Overpowering the entire facility to act as you please is certainly an option. (and an outstanding feat, if you manage to do so without informing the security central) but it is a platinium solution, while only a silver one is necessary (the gold would be if you do the silver, and manage to cut yourself some additional cash).

con it is

rumours spread right?
So if Eric calls all on the intercom and asks to go the the "meeting room one" for an announcement of some sort connected with his recent meeting with a Nissan Exec  ;D  and that all have to go there immediately. we could get them all or at least most in the room before they get suspicions, the thing is using their hopes for some good news, a cake and some coffee would be an additional insensitive so some (unconsciousness) guards are making them in the cafeteria.

The main thing is to use their psyche against them people always have their hopes, at least most of them so this will be more controllable then some investigation or check up or some sort of corporative thing.

Sen do I see someone having a comlink with the radar?

mmmm... A-team   ......   Would a ivisiable Murdock do with some gas granades?
Prepare for the worst, hope for the best and expect nothing!
Matrix;speaking;thinking;ExternalSourcesLink
RainDragonBar

Sentinemodo

  • *
  • Prime Runner
  • *****
  • Posts: 4498
  • Prepare for the worst - surprises will be pleasant
« Reply #1253 on: <06-07-11/1622:42> »
Quote
Sen do I see someone having a comlink with the radar?

No - all active commlinks were possessed by the hackers, and they are down.
Sorry for a small delay ;)

Denver Missions
concluded 01 02 03 04 05 10 09 11
running 13
runners: Caretaker Jerry

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1254 on: <06-07-11/1651:27> »
Aehm...just...dont forget some answers please...I love PbP because there is lot of space for detailed description. When Im GMing rlr run I always try to make plastic picture of the scene, well I`m always disapointed by lack of questions from players...
because this whole game is just about imagination...more detailed picture zou have in zour mind, more brilliant, accurate and propper action you are able to take. There is whole ocean of possibilities, we just need to be clever enought to ask for the right things and then use them right..so ...come on... >]

http://forums.shadowrun4.com/index.php?topic=3409.msg51165#msg51165

Sentinemodo

  • *
  • Prime Runner
  • *****
  • Posts: 4498
  • Prepare for the worst - surprises will be pleasant
« Reply #1255 on: <06-07-11/1701:22> »
Sorry, I haven't even noticed this one in the torrent :D
Right away
Sorry for a small delay ;)

Denver Missions
concluded 01 02 03 04 05 10 09 11
running 13
runners: Caretaker Jerry

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1256 on: <06-07-11/1710:12> »
I thought something like that happened...you are under FullAutoPosting :)

No prob.
Well, gentlemen, like Teyl_Iliar says:

RackOps for me

See you tomorrow

Kouryuu

  • *
  • Prime Runner
  • *****
  • Posts: 2717
  • The idea is to die young as late as possible -A.M.
« Reply #1257 on: <06-07-11/1716:22> »
I thought something like that happened...you are under FullAutoPosting :)

No prob.
Well, gentlemen, like Teyl_Iliar says:

RackOps for me

See you tomorrow

So tomorrow we try to end this one right? no more planning, just doing?

 ;D something  ;D
Prepare for the worst, hope for the best and expect nothing!
Matrix;speaking;thinking;ExternalSourcesLink
RainDragonBar

Sentinemodo

  • *
  • Prime Runner
  • *****
  • Posts: 4498
  • Prepare for the worst - surprises will be pleasant
« Reply #1258 on: <06-07-11/1726:55> »
OK. Movement of drones and rover. Position of D2 is desired to cover Sms approach, depends on Sams actions.

Ill try to take my flying minidrone inside. Anyhow: windows, doors holes...As soon as Im succesfull I will try to gather some info:

Questions by numbers:

1) This is supposed to be parts inventory, and the room to the left is Finished products inventory. What kind of access is there from outside?

2) What is this place? Does the workers there have LOS on the main assembly hall?

3) Does the guard positioned here have a clear LOS on the hall? Is he on the ground or somewhere above the ground?

4) Is this the main crane we were talking about?

5) This is the warehouse. Does this mean shelves with parst and finalized production? Where are access points? The guard there, what is its position...is it ground level office, or is he higher above the ground?

What is the level of background noise. I know that calm factory after the shift is almost scary :)

OK so production is on halt, workers there are working on machines, cleaning, doing maintenace. Would be Cursor able to run the lines on call?

1. there are external doors, similar to the loading docks (albait the ramps mounted there are for smaller vehicles you've been seeing from the minidrone moving the things around). Maglocks rating 5  but now open
2. based upon the equipment there which looks like computer stations (and your profession) you'd call it a rigging console center for the crane, assembly lines and smaller vehicles around the facility.
3. he is already taken down - that was last Sam's action
4. yes
5. this is an overview office, but he has left it - you seem to be using older tact map. Access points to the building are in NE corner (standard doors, and the loading docks both on S and N walls.

The factory is calm and quiet - as silent as it can be with 10 or so people in the assembly building, talking, joking, and using their tools from time to time. This is not a headshattering noise.

I didn't understand the one about Cursor - what exactly did you mean?
Sorry for a small delay ;)

Denver Missions
concluded 01 02 03 04 05 10 09 11
running 13
runners: Caretaker Jerry

Kouryuu

  • *
  • Prime Runner
  • *****
  • Posts: 2717
  • The idea is to die young as late as possible -A.M.
« Reply #1259 on: <06-07-11/1737:05> »
I didn't understand the one about Cursor - what exactly did you mean?
Can cursor activate the production line if needed?
as far as i understood.
Prepare for the worst, hope for the best and expect nothing!
Matrix;speaking;thinking;ExternalSourcesLink
RainDragonBar

 

SMF spam blocked by CleanTalk